Foto del Producto Proximamente
Interruptores de Carga SF6
FZW28-12 Boundary Load Break Switch
The FZW28-12 is an outdoor pole-mounted boundary load break switch (also called sectionalizer) combining SF6 insulation, vacuum interrupter, and an intelligent boundary controller. Automatically detects and isolates customer-side faults, protecting the upstream distribution network.
Caracteristicas Principales
- 12kV rated voltage, 630A rated current
- Three-phase SF6 gas-insulated sealed box
- Built-in vacuum interrupter for fault breaking
- Boundary fault controller with CT
- Auto-detection of single-phase ground faults
- GSM/GPRS fault notification to operators
- Mechanical life: 10,000 operations
- Electrical life: 10,000 operations at rated current
Especificaciones Tecnicas
| Rated Voltage | 12 kV |
| Rated Current | 630 A |
| Rated Frequency | 50 Hz |
| Rated Peak Withstand Current | 50 kA |
| Rated Short-Time Withstand Current | 20 kA / 4s |
| Rated Short-Circuit Making Current (Peak) | 50 kA |
| Mechanical Life | 10,000 operations |
| Power Frequency Withstand (Wet) | 34/35 kV |
| Power Frequency Withstand (Dry) | 42/49 kV |
| Lightning Impulse Withstand | 75/85 kV |
| SF6 Gas Pressure | 0 MPa (sealed) |
| Contact Gap | 8 ± 1 mm |
| Closing Time | <300 ms |
| Opening Time | 18-45 ms |
Aplicaciones
Urban and rural distribution networksGrid boundary point automationIndustrial/mining distribution protectionCity grid and rural grid modernization
Cumplimiento de Normas
IEC 62271-103GB/T 10963
Respuesta en 12hCertificado ISO / CE / CCCOEM Disponible
Preguntas Frecuentes
Cual es la tension nominal del FZW28-12 Boundary Load Break Switch?
El FZW28-12 Boundary Load Break Switch tiene una tension nominal de 12 kV. Consulte la tabla de especificaciones tecnicas para las clasificaciones electricas completas.
Cual es el plazo de entrega para el FZW28-12 Boundary Load Break Switch?
El plazo de entrega estandar para el FZW28-12 Boundary Load Break Switch es de aproximadamente 30 dias. Cantidades mayores o configuraciones personalizadas pueden requerir tiempo de produccion adicional.
Se puede personalizar el FZW28-12 Boundary Load Break Switch para proyectos OEM?
Si, NAIJI Electric ofrece fabricacion OEM y personalizada para el FZW28-12 Boundary Load Break Switch. Podemos ajustar especificaciones, marca y configuraciones segun requisitos especificos del proyecto.
Que normas cumple el FZW28-12 Boundary Load Break Switch?
El FZW28-12 Boundary Load Break Switch esta disenado y probado de acuerdo con IEC 62271-103, GB/T 10963. Todos los productos se someten a pruebas rigurosas de fabrica antes del envio.
Interesado en FZW28-12 Boundary Load Break Switch?
Obtenga precios directos de fabrica, especificaciones tecnicas y opciones de configuracion personalizada.